19 CAD-CAM incorporates Wire Frame, Surfaces and Solids toolpath and accurate g-code

Since 1985 BobCAD-CAM software has been dedicated to providing manufacturers just like you with powerful and easy to use software.

Boeing
Bosch
Smith & Wesson
NASA
Ford
Harley Davidson
Honeywell
Lockheed Martin
Disneyland Inc
University MI
University ID
University OH
University FL
UCLA
UCF
Florida Tech
Tufts University
University of Texas
USA Luge’s Team

Along with over 25,000 more satisfied BobCAD-CAM users.

We look forward to helping you make chips out of the competition!
BobCAD-CAM

"Thank you for a very efficient and informative demo of Bobcad 2007. I find the new user interface for machining the most intuitive and best I have evaluated. The simplicity is deceiving. The amount setup flexibility and machining technology is superb.
The seamless interface to Rhino will be a great asset in our currently developing new approach to three dimensional CAD/CAM.
Best regards,
Max Waddoups
Strayer Voigt, Inc.

"We recently received an IGES file with special 3D curves on it with Engraving. In the past we would have had to have sub-contracted this work out, but thanks to the Bob CAD CAM software we were able to create all the 3D curves with skins on and generate programs for them, and also cut the necessary engraving for this type of work. We have just completed the job, and have found the shut off zones in the plastic to be absolutely perfect. In fact, in my 25 year career, I've never had these shut-off zones so good. We are ecstatic with the results and very excited with our BobCAD package. Please, if there are any further developments with this CADCAM package, please contact us."
Thank you once again,
Russell S.

V19 Hoby Pro-Software
Version 19 CAD-CAM incorporates Wire Frame, Surfaces and Solids into one with the primary goal of allowing you the ability to create clean toolpath and accurate g-code programs for imported surface or solids type files. V19 supports DXF, IGES and STEP files for the importing of surfaces or solid models for machining. CAM functionality includes customizable tool libraries, canned cycles as well as customizable drilling cycles through using simple visual basic scripting technology. The feature comparison below will provide you with a complete list of features.

You will also be relieved to know that there are NO MAINTENANCE FEES!

Version 19 Features

File Import

DXF Import
IGES Import
Solids & Surfaces
STEP Import
Solids & Surfaces

Solid Modeling

CAD-Design with Primitive Solids
Solid Edit-Boolean Operations – Union, Difference & Intersection
Automatic Stitch surfaces to Solid
Automatic Un-Stitch surfaces from Solid
Definition boundary machining
Solid or Surface Toolpath wizard
Solid part rendering
Isolation Surface Machining
Offset Surfaces & Solids

2 Axis Milling

Pocketing with island avoidance
Automatic Spiral & Horizontal toolpath
Profiling - Open & Closed Shapes
Engraving
Bolthole Patterns – Grid & Circular

3 Axis Milling

Horizontal Z Axis Roughing
Horizontal Z Axis Finishing
Spiral Z Axis Roughing
Spiral Z Axis Finishing
Surface Roughing – Skin Surface, Revolved Surface, Swept Surface, Ruled Surfaces, Radial Surfaces
Surface Finishing – Skin Surface, Revolved Surface, Swept Surface, Ruled Surfaces, Radial Surfaces
Spiral Skin Surface Toolpath
Gears Creation & Machining
Clean Circle – Roughing & Finishing
Project Text Onto Surfaces – Roughing and Finishing
Project Text To Curves – Roughing & Finishing
Surface Machine Around Raised Text – Roughing & Finishing
Direct Surface Toolpath To Wireframe

4 Axis Milling

4th Axis Indexing
4th Axis Rotary

CAM & Communications

RS 232 Communications – Fully Customizable by the operator
DNC Communications - Fully Customizable by the operator
Post Processor Configurations - Fully Customizable by the operator
Post Processor Library – Available to all customers at no extra charge
Customizable CAM Menus
Customizable Drill Cycles
Customizable Tool Library
Customizable Tool Boxes & Icons
Graphical Tool Rendering
G-Code Editor
Color Coded NC Codes – Operator Definable

Verification

Solid NC Verification/Part Simulation
NC Code Backplot

Hole Making

Drilling
Tapping
Boring
Reverse Boring
Peck Drilling
Reaming

Visual Basic

Visual Basic Scripting Capability
Create & Record Operations
Script Library

2 Axis Lathe

Customizable Tool Library
Roughing
Finishing
Grooving
Slotting
Facing
Collision Detection
Diameter Programming
NC/G-Code Generation

Training

Complete Training Manual

Training Seminars Available – On Location or at our International Training School.
Call 877-262-2231 or 727-442-3554 for availability and scheduling